LUNG AN Stainless

Stainless Steel Coils 1.4404/316L

Stainless steel coil has excellent resistance to acid, heat, corrosion resistance, making it an ideal basis for the commercial application of materials. The range of stainless steel coil can be divided into 300 series and 400 series, the former belongs to nickel, with a capacity of more than 85%, which is chromium, the use of a smaller amount.

Stainless steel coil 300 series in addition to decorative purposes, widely used in building materials, kitchen utensils, pipe and industrial uses, Among them 304 is the most representative; 400 was due to hard material, usually made direct use or as a decorative stainless steel knives, forks and other utensils or mechanical parts.


Stainless Steel Coil Stainless steel coil has excellent resistance to acid, heat, corrosion resistance, making it an ideal basis for the commercial application of materials. The range of stainless steel coil can be divided into 300 series and 400 series, the former belongs to nickel, with a capacity of more than 85%, which is chromium, the use of a smaller amount.

Stainless steel coil 300 series in addition to decorative purposes, widely used in building materials, kitchen utensils, pipe and industrial uses, Among them 304 is the most representative; 400 was due to hard material, usually made ​​direct use or as a decorative stainless steel knives, forks and other utensils or mechanical parts.


Product Spec
Please drag the table
Type Int'l Standard Steel Designation Main Chemical Compositions Mechanical Properties
Cr Ni Mo Proof Stress (N/mm2) Tensile Strength (N/mm2) Elong- ation HRB
316L ASTM A240-96 UNS S31600 16.00~18.00 10.00~14.00 2.00~3.00 ≧ 205 ≧ 515 ≧ 40 ≧ 95
316L ASME SA240-95 UNS S31600 16.00~18.00 10.00~14.00 2.00~3.00 ≧ 205 ≧ 515 ≧ 40 ≧ 95
316L CNS G3163-93 316 16.00~18.00 10.00~14.00 2.00~3.00 ≧ 205 ≧ 520 ≧ 40 ≧ 90
316L JIS G4303-91 SUS 316 16.00~18.00 10.00~14.00 2.00~3.00 ≧ 205 ≧ 520 ≧ 40 ≧ 90
316L EN 10088:1995 1.4401 16.00~18.00 10.00~13.00 2.00~5.00 ≧ 205 520 ~ 670 ≧ 45  
316L DIN 17440:1996 1.4401 16.00~18.00 10.00~13.00 2.00~5.00 ≧ 205 510 ~ 710 ≧ 40  



Commonly used specification of Stainless Steel Coil HOT ROLLED STAINLESS STEEL COIL
Please drag the table
Thickness Width Surface
3.0mm ~ 8.0mm 1220MM ~ Max. 1540mm NO.1

COLD ROLLED STAINLESS STEEL COIL
Please drag the table
Thickness Width Hardness
0.1mm ~ 0.4mm Could be negotiable for small strips,max.300mm 1/4H ; 3/4H ; 1/2H ; FULL HARD
0.5mm ~ 3.0mm 1220mm ~ Max. 1540mm